PAVC Series Piston Pump | Parker
Enhance Performance with Parker PAVC Series Piston Pump
It has been designed to provide great efficacy, trustworthiness and lastingness to a variety of industrial uses. It is optimized for flow control and pressure regulation in the system as it improves performance and productivity. This piston pump is perfect for tough environments that require high hydraulic power. Experience Parker’s PAVC series Piston Pump and improve your business efficiency instantly. Best suited for industries requiring high operating performance with reliability at its core. Find out more now!
- Customized Solutions
- High Efficiency
- Reasonable Pricing
- Technical Support and Service
The PAVC Series Piston Pump by Parker offers high efficiency, durability, and precise fluid control for industrial applications.
-
Description of PAVC Series Piston Pump: Information and Specifications
The PAVC33 delivers flow rates of 39.4 LPM (10.4 GPM) at 1200 RPM and up to 59.0 LPM (15.6 GPM) at 1800 RPM. The PAVC38 model offers 45.0 LPM (11.9 GPM) at 1200 RPM and 67.8 LPM (17.9 GPM) at 1800 RPM. For higher flow needs, the PAVC65 provides 78.7 LPM (20.8 GPM) at 1200 RPM and 118.1 LPM (31.2 GPM) at 1800 RPM. The largest model, the PAVC100, achieves 119.6 LPM (31.6 GPM) at 1200 RPM and up to 179.8 LPM (47.5 GPM) at 1800 RPM.
Noise levels vary with operating pressure, ranging from 75 dB(A) to 85 dB(A) at 207 bar, depending on the model. The maximum operating pressure is 207 bar (3000 PSI), with a peak pressure capability of 248 bar (3600 PSI).
Key Features of the Parker PAVC Series Piston Pump
- High Strength Cast-Iron Housing
- Built-In Supercharger Ensures High Speed Capability- 3000 RPM (2600 RPM PAVC100)
- Sealed Shaft Bearing
- Two Piece Design for Ease of Service
- Cartridge Type Controls – Field Changeable
- Replaceable Bronze Clad Port Plate
- Airbleed Standard for Quick Priming
- Hydrodynamic Cylinder Barrel Bearing
- Thru-Shaft (PAVC100 Only)
- Full Pressure Rating on Most Water Glycol Fluids
- Pump Case and Shaft Seal are Subjected to Inlet Pressure Only
- Filter and/or Cool Drain Line7 bar (100 PSI) Maximum
The Parker PAVC series features a high-strength cast-iron housing, built-in supercharger, sealed bearings, and service-friendly design, ensuring high speed, durability, and ease of maintenance.
PAVC Series Piston PumpSpecifications
| Model | Displacement (cm³/rev) | Displacement (in³/rev) | Pump Delivery @ 1200 RPM (LPM) | Pump Delivery @ 1200 RPM (GPM) | Pump Delivery @ 1800 RPM (LPM) | Pump Delivery @ 1800 RPM (GPM) | Noise Levels @ 34 bar (dB(A)) | Noise Levels @ 69 bar (dB(A)) | Noise Levels @ 138 bar (dB(A)) | Noise Levels @ 207 bar (dB(A)) | Input Power @ 207 bar (KW) | Input Power @ 207 bar (HP) | Max Speed (RPM) | Max Pressure (bar) | Max Pressure (PSI) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PAVC33 | 33 | 2.0 | 39.4 | 10.4 | 59.0 | 15.6 | 75 | 76 | 78 | 79 | 21.3 | 28.5 | 3000 | 207 | 3000 |
| PAVC38 | 38 | 2.3 | 45.0 | 11.9 | 67.8 | 17.9 | 75 | 76 | 78 | 79 | 24.6 | 33.0 | 3000 | 207 | 3000 |
| PAVC65 | 65 | 4.0 | 78.7 | 20.8 | 118.1 | 31.2 | 77 | 78 | 80 | 81 | 43.1 | 57.8 | 3000 | 207 | 3000 |
| PAVC100 | 100 | 6.1 | 119.6 | 31.6 | 179.8 | 47.5 | 83 | 82 | 82 | 85 | 71.2 | 95.5 | 2600 | 207 | 3000 |
Parker PAVC Series Piston Pump Advantages and Applications
Mounting the Pump
- Mounting Orientation: Ensure the pump is mounted with the drive shaft horizontal. The pump can be mounted in any position, but the preferred position is with the drain port at the top to facilitate proper venting of air.
- Mounting Surface: Use a rigid and flat mounting surface to prevent distortion of the pump housing. Ensure the surface is clean and free of debris.
- Bolt Torque: Secure the pump using bolts tightened to the recommended torque specifications. Over-tightening or under-tightening can lead to misalignment and potential damage.
Shaft Alignment
- Coupling: Use flexible couplings to connect the pump shaft to the drive shaft. Ensure the shafts are properly aligned to prevent undue stress on the pump bearings.
- Alignment Check: Perform an alignment check after installation and periodically during maintenance to ensure the coupling remains properly aligned.
Inlet and Outlet Connections
- Inlet Piping: Use pipes or hoses of adequate size to prevent restrictions and ensure a sufficient supply of fluid to the pump. Avoid sharp bends and keep the inlet line as short as possible.
- Outlet Piping: Ensure the outlet piping is properly secured and does not place excessive stress on the pump. Use flexible hoses if necessary to absorb vibrations.
- Filtration: Install filters in the inlet line to prevent contaminants from entering the pump. Maintain SAE Class 4, ISO 16/13, ISO 18/15 maximum recommended filtration levels.
Drain Line
- Drain Line Installation: Install a drain line from the pump’s drain port to the reservoir. Ensure the drain line is of adequate size and kept below the fluid level in the reservoir to maintain a flooded condition.
- Backpressure: Avoid excessive backpressure in the drain line. Ensure it does not exceed the pump’s maximum allowable drain line pressure of 7 bar (100 PSI).
Parker PAVC Series Piston Pump Catalog
| PAVC33BR42M26 | Parker Piston Pump Price | Contact Us |
|---|---|---|
| PAVC33B2L4A26 | USD4917-4918 | Inquiry about this Parts |
| PAVC652R42CMP13 | USD4891-4892 | Inquiry about this Parts |
| PAVC65B2R42C13 | USD4994-4995 | Inquiry about this Parts |
| PAVC38L4HP1 | USD5068-5069 | Inquiry about this Parts |
| PAVC38BR416 | USD5757-5758 | Inquiry about this Parts |
| PAVC100 38R 4222 | USD2545-2546 | Inquiry about this Parts |
| PAVC100R42M22 | USD3634-3635 | Inquiry about this Parts |
Get In Touch
If you’re interested in exploring a range of PAVC Piston Pump, and you’re looking for a brand that matches the quality and reliability of industry leaders, consider LOYAL.
Interested in learning more about our products and how they can benefit your operations? Visiting our official website or reaching out to our customer service team through official channels will provide you with all the information and assistance you need.
Choose LOYAL for reliable, efficient, and innovative hydraulic solutions tailored to meet and exceed your expectations.
Latest Articles ※
Related Topics About Hydraulic Pump
PAVC Series Piston Pump: Answers to Common Queries
Explore the advantages of the PAVC Series Piston Pump for enhanced performance.
Q: What is the maximum operating pressure for the PAVC Series Piston Pump?
A: The PAVC Series Piston Pump can operate at a maximum pressure of up to 3000 PSI, depending on the specific model.
Q: What types of fluids are compatible with the PAVC Series Piston Pump?
A: The PAVC Series is compatible with a wide range of hydraulic fluids, including standard mineral oils and biodegradable fluids, as long as they meet the required viscosity and temperature specifications.
Q: Does the PAVC Series Piston Pump support variable displacement?
A: Yes, the PAVC Series Piston Pump is available in both fixed and variable displacement configurations, allowing for efficient power management and control.
Q: What is the typical application range for the PAVC Series Piston Pump?
A: The PAVC Series is commonly used in industrial applications such as manufacturing, material handling, and mobile equipment, providing reliable hydraulic power and control.
Q: How does the PAVC Series Piston Pump ensure energy efficiency?
A: The PAVC Series features a highly efficient design with low internal leakage and optimized flow control, which helps reduce energy consumption and improves overall system efficiency.
Q: What maintenance requirements should I expect for the PAVC Series Piston Pump?
A: Regular maintenance includes checking fluid levels, monitoring for leaks, and replacing filters as needed. It’s also important to follow the manufacturer’s guidelines for periodic inspections and part replacements to ensure optimal performance.